红心火龙果发酵液喷雾干燥工艺优化及红心火龙果籽油的研究

以红心火龙果发酵液作为研究对象,通过优化喷雾干燥工艺制备粉剂,最佳工艺条件为:20%麦芽糊精,进液量:10mL/min,进口温度为120℃,出口温度为65℃;得到的粉剂为紫红色粉末,益生菌含量达到108cfu/g以上,口感酸甜。将发酵后的火龙果籽进行提取,得到的火龙果籽油含有丰富的十六酸、亚油酸和油酸。     

电子渠道用户发展现状浅析——以江苏省广电有线信息网络股份有限公司为例

通过对江苏省全省电子渠道用户的总量和地区分布,分析了电子渠道缴费用户的流失及消费情况,找出了目前电子渠道存在的一些问题,并提出相应的策略。     

Targeting S1PRs as a Therapeutic Strategy for Inflammatory Bone Loss Diseases—Beyond Regulating S1P Signaling

As G protein coupled receptors, sphingosine-1-phosphate receptors (S1PRs) have recently gained attention for their role in modulating inflammatory bone loss diseases. Notably, in murine studies inhibiting S1PR2 by its specific inhibitor, JTE013, alleviated osteoporosis induced by RANKL and attenuated periodontal alveolar bone loss induced by oral bacterial inflammation. Treatment with a multiple S1PRs modulator, FTY720, also suppressed ovariectomy-induced osteoporosis, collagen or adjuvant-induced arthritis, and apical periodontitis in mice. However, most previous studies and reviews have focused mainly on how S1PRs manipulate S1P signaling pathways, subsequently affecting various diseases. In this review, we summarize the underlying mechanisms associated with JTE013 and FTY720 in modulating inflammatory cytokine release, cell chemotaxis, and osteoclastogenesis, subsequently influencing inflammatory bone loss diseases. Studies from our group and from other labs indicate that S1PRs not only control S1P signaling, they also regulate signaling pathways induced by other stimuli, including bacteria, lipopolysaccharide (LPS), bile acid, receptor activator of nuclear factor κB ligand (RANKL), IL-6, and vitamin D. JTE013 and FTY720 alleviate inflammatory bone loss by decreasing the production of inflammatory cytokines and chemokines, reducing chemotaxis of inflammatory cells from blood circulation to bone and soft tissues, and suppressing RANKL-induced osteoclast formation.     

钢制导热油烘缸的数值模拟与结构优化

针对钢制导热油烘缸在工作时出现工作表面温度分布不均匀、温差大等情况，采用三维建模和模拟仿真方法对钢制导热油烘缸的结构进行优化。本研究主要从3个方面对钢制导热油烘缸进行结构改进，分别是改变循环油路通道数量，改变进油槽与出油槽上孔的排列方式，改变循环油路的结构。研究结果表明，相对其他烘缸结构，具有循环油路通道数量为20个、进油槽与出油槽上孔为单排排列、循环油路两两相通的钢制导热油烘缸的性能更好，可以达到工作表面温度分布均匀、温差控制在±5℃以内的目的。     

接触器触头系统振动机理分析及算法优化

为了解决合闸过程中动、静触头接触引起的振动弹跳问题.本文建立了接触系统的二自由度运动微分方程,并利用遗传算法对交流接触器吸合过程进行优化,同时通过高速摄影实验对接触弹跳的全过程进行了观察和分析.结果表明:理论与实验结果高度一致,铁心在触头分离前发生碰撞,进一步加剧触头弹跳;铁芯弹跳再次碰撞时,触头的弹跳不受影响;在接触器运行过程中,动铁芯的运动会引起系统轻微振动;采用遗传算法优化的接触器触头弹跳时间和最大振幅均减小.研究结果为进一步控制和减小接触弹跳提供了理论依据.     

Pore-scale study of effects of different Pt loading reduction schemes on reactive transport processes in catalyst layers of proton exchange membrane fuel cells

Reducing the Platinum (Pt) loading while maintaining the performance is highly desired for promoting the commercial use of proton exchange membrane fuel cells (PEMFCs). Different methods have been adopted to fabricate catalyst layers (CLs) with low Pt loading, including utilizing lower Pt/C catalysts (MA), mixing high Pt/C catalysts with bare carbon black particles (MB), and reducing CL thickness while maintaining high Pt/C ratio (MC). In this study, self-developed pore-scale model is adopted to investigate the performance of the three Pt reduction methods. It is found that MA shows the best performance while MB shows the worst. Then, effects of Pt dispersion are further explored. The results show that denser Pt sites will result in higher local oxygen flux and thus higher local transport resistance. Therefore, MA method, which shows the better Pt dispersion, leads to improved performance. Third, CLs with quasi-realistic structures are investigated. Higher tortuosity resulting from the random pores produces higher bulk resistance along the thickness direction, while MA still exhibits the best performance. Finally, improved CL structures are investigated by designing perforated CL structures. It is found that adding perforations can significantly reduce the bulk transport resistance and can improve the CL performance. It is demonstrated that CL structure plays important roles on performance, and there are still huge potentials to further improve CL performance by increasing Pt dispersion and optimizing CL structures.     

Cd-substituted NiZnCo ferrite with high dielectric constant and low coercivity for high-frequency electronic devices

This work investigated the effect of replacing Zn²⁺ ions with Cd²⁺ ions on the microstructure and electromagnetic properties of NiZnCo ferrites. The studies show that the Cd²⁺ ions substituted for Zn²⁺ ions at the A sites (tetrahedral sites) of the ferrite lattice. The large ionic radius of the Cd²⁺ ions can cause lattice distortion. Concurrently, the low melting point of CdO can effectively reduce the sintering temperature of NiZnCo ferrite, thereby significantly changing the magnetoelectric properties of NiZnCo ferrite. These changes are mainly manifested as the decrease in the saturation magnetization (Ms) from 66.6 to 58.5 emu/g and the increase in coercivity (Hc) from 31.2 to 34.8 Oe. The dielectric constant increases considerably, dielectric loss tanδ gradually decreases from 4.71 to 0.83 at 10 kHz, and DC resistivity ρ decreases considerably from 8.0 × 10⁴ to 1.61 × 10⁴ Ω m. Therefore, the substitution of Cd²⁺ ions in NiZnCo ferrite provides excellent electrical and magnetic properties, which provide a reference for the development of high-frequency miniaturized electronic equipment.     

Creep behaviour of an Al–Si–Al2O3 composite based on phase evolution at 1300oC

An Al–Si–Al₂O₃ composite was prepared with corundum, aluminium powder and silicon powder. A creep test was carried out at 1300°C under 0.2 MPa for 50 h in air. The results show that the Al–Si–Al₂O₃ composite performs a low constant creep rate and remain until the end of the 50-h test. This is attributed to the in-situ formation of the tough non-oxide reinforcements, whisker-like (AlN)_x(Al₂OC)_1-x solid solution and granular β-SiC, by reactions of Al and Si during creep test. The whisker-like (AlN)_x(Al₂OC)_1-x solid solution and granular β-SiC reinforcements are evenly filled in the pores, which play the role of bridging and pinning reinforcement, forming a strong network structure with corundum aggregates. Moreover, these non-oxide phases are not wetted by the liquid phases, which impel the liquid phase shrinks in the network structure in isolation during creep test. Thus, the adverse effect of the liquid phase on the high-temperature strength of the composites is eliminated, so the composites with strong network structure quickly get a stationary low-creep state. A creep mechanism model is established.     

Two Methods,One Goal: Structural Differences between Cocrystallization and Crystal Soaking to Discover Ligand Binding Poses

In lead optimization, protein crystallography is an indispensable tool to analyze drug binding. Binding modes and non-covalent interaction inventories are essential to design follow-up synthesis candidates. Two protocols are commonly applied to produce protein–ligand complexes: cocrystallization and soaking. Because of its time and cost effectiveness, soaking is the more popular method. Taking eight ligand hinge binders of protein kinase A, we demonstrate that cocrystallization is superior. Particularly for flexible proteins, such as kinases, and larger ligands cocrystallization captures more reliable the correct binding pose and induced protein adaptations. The geometrical discrepancies between soaking and cocrystallization appear smaller for fragment-sized ligands. For larger flexible ligands that trigger conformational changes of the protein, soaking can be misleading and underestimates the number of possible polar interactions due to inadequate, highly impaired positions of protein amino-acid side and main chain atoms. Thus, if applicable cocrystallization should be the gold standard to study protein–ligand complexes.